Skip to main content

Peplink Router Firmware Upgrade Guide (Mobile Device)

Updated over 4 months ago

Before You Begin

  • When entering passwords, ensure capitalization is correct and no whitespace is included by mistake.

  • Router Wireless Connection

    • SSID: Augury_Cellular

    • Password: augurysys1

  • Router Web Admin URL: https://192.168.50.1

    • NOTE: You MUST type “https://”

  • Router Local Login

    • Username: admin

    • Password: Augurysys1

NOTE: You must be in the same physical area as the affected device with an adequate Wi-Fi signal strength.These actions must be performed on the router’s local wireless network. Due to the nature of this outage, the device cannot be accessed remotely.

IMPORTANT: Disable mobile data before starting.

Step 1 - Disable Mobile Data

  1. Mobile data must be disabled to avoid unexpected behavior while navigating the router’s local interface and applying changes.

  2. iOS

    1. Open Settings -> Cellular/Mobile Data -> Toggle Off.

  3. Android

    1. Open Settings -> Connections/Network & Internet -> Toggle Mobile Data Off.

Step 2 - Connect to Router Wi-Fi

  1. Open Wi-Fi settings.

  2. Select SSID 'Augury_Cellular'.

  3. Enter password provided by Augury: augurysys1

    1. NOTE: If that password does not work, enter Augurysys1

  4. Confirm you are connected.

Step 3 - Access Web Admin

  1. Open a web browser (Safari, Chrome, Firefox).

  2. Go to: https://192.168.50.1

    1. NOTE: You MUST type “https://”

  3. Accept security warning (Proceed Anyway).

  4. Log in with admin credentials: admin | Augurysys1

Step 4: Check Current Firmware

  1. On the Dashboard, locate 'Firmware' under Device Information.

  2. If the current firmware version installed on the device shows "8.3.0s068 build 5014", proceed. If not, stop here.

Step 5 - Apply Upgrade

  1. Select the System button from the Dashboard, and then select Reboot on the left side of the screen.

  2. Select the radio button that says 8.4.1 and click Reboot

  3. If 8.4.1 does not exist as an option, stop here and contact Augury support

Step 6: Verify the Update

  1. Log back into https://192.168.50.1

  2. Confirm the firmware version matches version 8.4.1 selected in the previous step.

Step 7 - Re-enable Mobile Data

  1. Once the upgrade is complete, turn Mobile Data back on.

Pro Tips

  • Do not power off the router during the upgrade.

  • Ignore 'No Internet Connection' warning - you only need local access.

  • If the page fails to load, confirm mobile data is off and the SSID is correct.

Attachment icon
Peplink Router Firmware Upgrade Guide (Mobile Device).pdf
Related Articles
Migrating Halo Nodes from Augury Cellular to Site Network
Mounting the Peplink Router Enclosure Box
Setting up Peplink Max BR1 Mini
Peplink Router Firmware Upgrade Guide (macOS Device)
Peplink Router Firmware Upgrade Guide (Windows Device)
Did this answer your question?