Once your user account has been created, and the machine(s) information has been entered, you're ready to assemble your new device.
Assembly
For proper operation of the Auguscope, read carefully and follow the assembly instructions.
Screw on and tighten the magnet to the sensor
Note: Remove the protective cap from the sensor in order to take a recording. The sensor provided with the Auguscope has a powerful magnet and it is covered with a metal cap that needs to be removed. If the device is not sticking to the machine as it should, it is likely that the cap has not been removed.
Connect the sensor to the sensor cable
Connect the sensor cable BNC connector to the Auguscope BNC connector by aligning the hinges and pushing while turning clockwise until a click is heard.
Connect the data cable to the Auguscope by aligning the arrows on the plug and jack and pressing until the connector sleeve snaps and a click is heard.
Note: When disconnecting the data cable, pull the sleeve to unlock it.
Connect the data cable to the smartphone
Note: If you are using the designated Auguscope carrying bag, place the Auguscope device inside the carrying bag before assembling and attach the sensor to the magnetic strip or to the bag to secure it.
Ensure you have tight connections! Each of the following connection points within should have a tight, secure connection before taking a reading.
Data Cord to Handheld Device
Data Cord to Auguscope
Auguscope to Sensor Cord
Sensor Emergency Release
Sensor Cord to Sensor
Sensor to Magnet
Charging the Auguscope
1. The Auguscope needs to maintain a charge to function.
2. To charge the Auguscope, use the included USB Charging cable. Attach the cable to the top of the Auguscope and plug it into a power source to charge.
Note: When fully charged, the battery will function for up to 6 hours.
3. When your handheld device is connected to the Auguscope, you will see an Auguscope icon in the upper right-hand corner of the Auguscope app*. The icon indicates the percentage the Auguscope is charged.
*Only in the IOS mobile application
Points to remember about the Auguscope as it pertains to charging:
The Auguscope must have a charge to function properly.
There is a USB charging cable in the box with the Auguscope.
When fully charged, the battery will last up to 6 hours.
The LED lights on the Auguscope are generally unlit and do not indicate a charge.
We recommend charging the device when not in use.
Auguscope case Mk2
